Tia Portal Port

https://support.industry.siemens.com/cs/document/8970169/which-ports-are-used-by-the-various-services-for-data-transfer-via-tcp-and-udp-and-what-should-you-watch-out-for-when-using-routers-and-firewalls-?dti=0&lc=en-WW

The rule for port enabling can be used for internal routers. In general, access from the internet to an S7-CPU should be made via VPN (Virtual Private Network).

https://support.industry.siemens.com/tf/us/en/post/650762/

My question now is, what port number and what protocol (TCP or UDP) and what port name do I have to enable in the router (Through Port Forwarding) in order to connect with WEBSERVER of the CPU1212C? … There i…

https://support.industry.siemens.com/tf//ww/en/posts/ports-used-by-step7-to-communicate-to-plc-s7-300-400/71113?page=0&pageSize=10

For enabling that access, The administrator of the net asked us wich protocol /number of port is used by Siemens Step 7(that I’m using in my …

https://support.industry.siemens.com/tf//ww/en/posts/change-pn-ie-default-port/97408?page=0&pageSize=10

HiIs there a way to initialize a PN/IE connection to a device, using TIA (v12. SP1 Basic), over another port as the default 102?In other words, is …

http://www.plctalk.net/qanda/showthread.php?t=93112

Feb 6, 2015 – I have a single S7-1500 & HMI connected to a Sierra wireless router (static IP) with port forwarding enabled. I understand it is not a secure way …

https://www.automationdirect.com/microsites/c-more/software-help/Content/636.htm

Use the TIA Portal (SIMATIC STEP 7) screen on the top of this page as reference. Configure the … PLC Port (0-65535):TCP port at the PLC. This setting is not …

https://public.eandm.com/Public_Docs/s71500_communication_function_manual_en-US_en-US.pdf

Addition to the communication protocols and port numbers used for SIMATIC S7-1500 software … programming software “STEP 7 as of V12 (TIA Portal)”.

https://www.dmcinfo.com/latest-thinking/blog/id/9151/connecting-to-a-siemens-plc-with-access-address

Jan 14, 2016 – This can be accomplished in TIA Portal, or in the older Simatic Manager. … port in the hardware config of your PLC in Siemens TIA Portal …

https://www.festo.com/net/lt_lt/SupportPortal/default.aspx?q=TIA+Portal&tab=18

Siemens TIA Portal with CPX I-Port Master for IO Link Devices CPX-CTEL-2-M12-5POL-LK; SDAT-MHS-M80-1L-SA-E-0.3-M8; CPX-FB34; IM151-8F PN/DP …

https://www.hmisource.com/otasuke/files/manual/gpproex/new/device/data/sie_tiae.pdf

1. Siemens AG. TIA Portal. Ethernet Driver. 1. System Configuration. …. Select the Display port to be connected to the External Device. Use System Area.

https://support.ixon.cloud/hc/en-us/articles/360000937712-Siemens-S7

May 27, 2019 – In TIA Portal, right-click a Data Block, or the linked Function Block … be filled based on the selected protocol (port 102 for Siemens-S7).